Innovita water heaters are high efficiency, instantaneous, wall-mounted water heaters, available in our Permanent Pilot and Ionized ignition systems, Forced Flue and Natural Draft exhaust systems, and Open and Room-Sealed air intake systems – all of them in a variety of capacities and heat input rates. Unlike traditional water heaters, which take time to heat up and have a capacity limited by their tank’s storage size, all our water heaters provide instant and continuous hot water in unlimited volumes.
The fact that they are instantaneous and therefore do not require a tank, means that they are more energy efficient, more hygienic, and occupy less valuable space than water heaters with tanks. In the innovative Ionized models, there are further energy savings of up to 30%, thanks to their smart ignition system, which turns the burner on and off instantaneously, instead of having a permanent pilot. All of our water heaters (not applicable to room-sealed models) carry the Energy Label of the countries to which they are exported to.
The Mineral Content of water varies from region to region and, where it is high, usually reduces the efficiency of water heaters. All Innovita water heaters, particularly the Ionized with its smart ignition system, are designed to minimize the effects of poor water quality, increasing the life of components and reducing maintenance costs.
What is the "highest capacity" model?
The highest capacity models are the 18 Liters models available in standing pilot, ionized, and ionized forced flue. Note that the 14 Liter models other than the forced flue version have specific chimney requirements and care should be taken during installation.
Which model is the most appropriate for a large family?
All Innovita models are instant water heaters and as such the number of people in the household is not a consideration as is the case with storage water heaters.
What are the advantages of Innovita water heater over the other brands?
- Innovita quality on par with the European competitors
- Only Iranian brand with CE certification for water heaters
- Only water heater with 3 years warranty
- Highest efficiency and lowest operating cost
- Largest selection of ranges and models
What is the difference between Ionized and Standing Pilot water heaters?
In Standing Pilot water heaters the ignition system is a continuously lit pilot flame, whereas in Ionized models the Standing Pilot is replaced by a “smart” ignition system. Ionized systems provide on average a 17% saving on gas consumption and have the highest energy rating. Build-up is also reduced considerably in Ionized models
What is the power source for the electric igniter?
Batteries and/or electrical adapter.
Will the water heater work in the case of a black-out?
Yes, the water automatically switches to the battery system.
How much electricity do Ionized models use?
Extremely low, and regular batteries last for many months (depending on use).
What are the special features of the Forced Flue models?
These models can be used in the case of chimney size restrictions in the installation place. Innovita is the first manufacturer of these models in Iran.
How much change to the current piping is required, in order to upgrade from a floor standing water heater to a wall-hung water heater?
Yes, minor piping extension is required.
What does the free installation include?
Installation of the water heater on the wall, the connections for gas and water are included. All piping must be prepared before hand at the place of installation at the cost of the customer.
Are the installation requirements for all the water heaters the same?
No, higher capacity water heaters have more installation restrictions.
What about installations in bathrooms, toilets, lockers rooms, … ?
Installations in these areas are not done by Innovita and void the warranty due to operating dangers.
Can a water heater be used for two floors?
No, this is not recommended.
What is the maximum distance between the water heater and the point of use?
Between 7 and 10 meters depending on the various factors such as water heater model, piping, inlet temperature, …
What is the minimum chimney pipe height?
3 meters, however forced flue models do not have any restriction.